BAKFlip G2 Tonneau Cover for RAM 1500 — Hard Folding Truck Bed Cover
Our BAKFlip G2 transforms your RAM 1500 into a secure, weather-resistant hauling machine. This hard folding tonneau cover features heavy-duty aluminum panels that fold completely open for full bed access or lock in multiple positions for partial loads.
Engineered specifically for RAM 1500 models with 5'7", 6'4", and 8' beds, the G2 installs without drilling using our integrated clamp system. The low-profile design sits flush with your bed rails, maintaining aerodynamics while adding a premium look to your truck.
BAKFlip G2 construction & compatibility
Aluminum Panel Construction & Finish
We build every BAKFlip G2 panel from heavy-gauge aluminum for strength without adding excessive weight to your RAM 1500. The matte black powder coat finish resists UV damage, scratches, and corrosion in all weather conditions.
Each panel connects with our patented hinge system that allows smooth folding motion while maintaining a tight seal. The reinforced edges prevent warping under load, and the structural ribs run lengthwise for maximum rigidity. Our BAKFlip MX4 uses similar construction with upgraded FRP panels if you need even lighter weight.
RAM 1500 Fitment & Installation
Bed Size Compatibility
We manufacture the BAKFlip G2 in three sizes for RAM 1500 trucks. The 67.4″ model fits 2002-2024 RAM 1500 short beds (listed as 5’7″ bed length). Our 76.3″ cover fits 2002-2024 standard beds (6’4″ designation). The 96.9″ option covers 2002-2024 long beds (8′ configuration).
All versions work with RAM 1500 Classic, Tradesman, Big Horn, Laramie, Rebel, Longhorn, and Limited trims. The cover is compatible with spray-in bed liners, drop-in liners, and factory bed coating.
Weather Protection & Security Features
The BAKFlip G2 uses a dual-action tailgate seal that creates two barriers against water intrusion. When you close your RAM 1500 tailgate, the seal compresses against both the tailgate top and the panel edge, forming a weatherproof barrier.
EPDM rubber seals run along every panel edge and side rail, keeping rain, snow, and dust out of your truck bed. The automatic latch system locks panels together when closed, and you can secure the entire cover using your factory tailgate lock. Optional BAKBox 2 toolbox integrates behind the cab for added lockable storage.
Complete Your RAM 1500 Bed Setup
Rated 4.8 by verified buyers
BAKFlip G2 RAM 1500 Questions
Yes, the BAKFlip G2 is fully compatible with spray-in bed liners, drop-in liners, and factory bed coatings. Our clamp system adjusts to accommodate the added thickness of bed liners.
The side rails sit inside your RAM 1500 bed rails, so liner texture won't interfere with installation. You may need to adjust clamp tension slightly to account for liner thickness — we include adjustment instructions for lined beds in your installation guide.
The BAKFlip G2 supports up to 400 pounds of evenly distributed weight across the closed panels. This capacity handles snow accumulation, rooftop cargo carriers, or standing for truck maintenance.
For cargo hauling, we recommend keeping heavy items directly on your RAM 1500 bed floor rather than on top of the closed cover. The panels are designed primarily for bed protection and security rather than as a load-bearing platform.
No, you'll need to fold up at least the rear panel before opening your tailgate. The cover extends over the tailgate edge to create a weatherproof seal, which prevents tailgate operation when panels are closed.
The rear panel folds up in about two seconds using the quick-release latches. This design is standard across hard folding tonneau covers and ensures proper weather sealing when closed.
The BAKFlip G2 is compatible with most cab-mounted racks and headache racks that don't extend over the bed opening. The cover requires clearance to fold completely against the cab when open.
For truck bed rails and tie-down systems, we offer <a href="/bakflip-side-rail-accessories/">compatible accessories</a> that mount directly to the BAKFlip side rails. Standard stake pocket tie-downs won't work with the cover installed since our rails occupy those pockets.
Clean your BAKFlip G2 with mild automotive soap and water every 4-6 weeks. Avoid abrasive cleaners, pressure washers above 1200 PSI, and automatic car washes with harsh brushes.
Condition the EPDM rubber seals quarterly using silicone-based seal treatment. Lubricate the hinge pins annually with lithium grease. Our <a href="/bakflip-maintenance-kit/">maintenance kit</a> includes everything needed for proper cover care. In winter climates, clear heavy snow from panels to prevent ice buildup in the hinges.
The BAKFlip G2 uses heavy-gauge aluminum panels with a matte powder coat finish. The MX4 features lighter FRP (fiber-reinforced polymer) panels with an aluminum substructure and automotive-grade finish.
Both covers offer identical folding functionality, weather sealing, and security. The MX4 is approximately 10 pounds lighter and includes upgraded hinge seals. Choose the G2 for maximum durability and value, or the <a href="/bakflip-mx4-ram-1500/">MX4</a> for lighter weight and premium aesthetics.
No, the BAKFlip G2 is not compatible with RAM 1500 models equipped with factory RamBox storage. The RamBox system modifies the bed rail configuration in a way that prevents proper side rail mounting.
If your RAM 1500 has RamBox, contact our customer support team. We can recommend alternative cover solutions designed specifically for RamBox-equipped trucks.