BAKBox 100 Truck Bed Toolbox – Folding Storage for BakFlip Covers
The BAKBox 100 is our ingenious truck bed toolbox designed exclusively to work with BakFlip folding tonneau covers. This compact storage solution mounts behind the cab, under your folded cover panels, giving you weatherproof organization without sacrificing bed space or cover functionality.
Unlike traditional toolboxes that force you to remove your tonneau cover, the BAKBox 100 integrates seamlessly with our folding design. Access your tools, tie-downs, and gear instantly while your BakFlip cover stays fully operational. We engineered this system for truck owners who refuse to choose between security and convenience.
The reinforced polymer construction withstands jobsite abuse while the rubber seals keep moisture and dust out. Install takes under 15 minutes with basic hand tools, and the low-profile design preserves your truck's aerodynamic profile. Whether you're a contractor carrying daily essentials or an outdoor enthusiast storing recovery gear, the BAKBox 100 turns wasted space into functional storage.
BAKBox 100 specifications
Compatible BakFlip Covers & Installation
The BAKBox 100 works with every BakFlip folding tonneau cover we manufacture, including the BakFlip G2, BakFlip MX4, BakFlip F1, and Revolver X4s models. Our universal mounting system adapts to both full-size and short bed configurations without modifications.
Installation requires no drilling or permanent alterations to your truck bed. The BAKBox 100 mounts using included clamps that attach to your bed rails in the same location as your BakFlip cover. Simply position the box behind the cab, secure the four mounting brackets, and verify clearance when folding your cover panels forward.
Storage Capacity & Organization
We designed the BAKBox 100 to maximize usable volume within the space constraints of a folding cover system. The 52-inch width spans nearly the full bed width behind your cab, while the 14-inch depth accommodates everything from socket sets to jumper cables without wasting vertical space.
The 90-pound load rating handles heavy tools and equipment without flexing. We reinforced the bottom panel and sidewalls to support the weight of impact drivers, tow straps, and recovery gear that contractors and off-roaders carry daily. The integrated tie-down slots inside the box prevent items from sliding during transport.
Weather Protection & Durability
Our UV-resistant polymer composite withstands years of sun exposure without fading or becoming brittle. The material resists impacts from tools, prevents rust and corrosion, and cleans easily with soap and water. We mold each BAKBox 100 as a single piece to eliminate weak points where traditional aluminum boxes develop leaks.
The rubber seal around the lid edge creates a weatherproof barrier against rain, snow, and road spray. While not submersible, the seal keeps contents dry during car washes and heavy storms. Dust and dirt stay out even on unpaved roads and jobsites.
Complete Your Truck Bed System with BakFlip Covers
Rated 4.8 by verified buyers
BAKBox 100 Installation & Compatibility Questions
Yes, the BAKBox 100 is compatible with all BakFlip folding tonneau covers including the G2, MX4, F1, and Revolver X4s models. The universal mounting system works with both full-size and short bed truck configurations from all major manufacturers.
The toolbox mounts using the same bed rail system as your BakFlip cover, so if your cover fits properly, the BAKBox 100 will integrate seamlessly. Our design team engineered this compatibility into every unit we manufacture.
The interior dimensions measure 8.5 inches high, 52 inches wide, and 14 inches deep, providing approximately 3.5 cubic feet of usable storage volume. This accommodates a full mechanic's tool set, portable air compressor, jumper cables, tow straps, and emergency roadside kit.
The 90-pound load capacity handles heavy tools and equipment without flexing or sagging. The shallow 14-inch depth means you can reach every item easily without digging through multiple layers of gear.
No, the BAKBox 100 mounts low enough that your BakFlip cover folds completely open against the cab without interference. You maintain 100% truck bed access for loading full-length cargo like lumber, ladders, or furniture.
The toolbox remains securely mounted behind the cab while your cover panels stack above it. This design gives you the best of both worlds – organized storage when you need it, full bed space when you don't.
The BAKBox 100 features a weather-resistant rubber seal that keeps contents dry during rain, snow, and car washes, but it's not designed for submersion. The seal creates an effective barrier against moisture, dust, and road spray under normal driving and weather conditions.
For electronics or items requiring absolute water protection, we recommend using additional waterproof storage bags inside the toolbox. The polymer construction prevents rust and corrosion that plague metal toolboxes exposed to moisture.
Installation is straightforward and takes 15-20 minutes with basic hand tools. We include complete instructions, all necessary hardware, and mounting brackets with every BAKBox 100. No drilling or permanent modifications to your truck bed are required.
The four mounting clamps attach to your existing bed rails using the same system as your BakFlip cover. If you successfully installed your tonneau cover, you can install the BAKBox 100 with confidence.
The quick-release clamp system allows removal in under two minutes without any tools. Simply flip open the four mounting clamps, lift the 28-pound toolbox straight up, and set it aside. The mounting brackets stay attached to your bed rails for rapid reinstallation when you're ready.
This removable design gives you flexibility for hauling oversized cargo while maintaining organized storage during daily driving. One person can easily remove and reinstall the BAKBox 100 as needed.
Yes, the BAKBox 100 mounting system works with both spray-in and drop-in bed liners. The clamps attach to your bed rails above the liner, just like your BakFlip tonneau cover mounts. The toolbox sits on top of your bed liner without requiring any modifications.
If you have an extremely thick aftermarket bed mat, verify that it doesn't interfere with the mounting clamp positioning. Standard bed liners from major manufacturers pose no compatibility issues.