BakFlip Ladder Rack Compatible Systems for Your Truck Bed Cover
Our BakFlip CS Rack System is the first over-the-cab ladder rack engineered to work with folding tonneau covers. The rack sits above your BakFlip cover, allowing full access to your truck bed while keeping ladders, lumber, and long cargo secure. Install the system in minutes using our integrated mounting points — no drilling required.
The CS Rack features heavy-duty aluminum construction with load capacity up to 80 lbs per crossbar. Whether you're a contractor hauling extension ladders or a weekend warrior transporting kayaks and lumber, this rack gives you the versatility to carry oversized items without removing your tonneau cover.
What makes our ladder rack systems work with folding covers
Load capacity and weight distribution guidelines
Each BakFlip CS Rack crossbar safely supports up to 80 lbs when weight is evenly distributed across the bar’s length. For maximum stability, position heavier items toward the center of each crossbar and use our recommended tie-down points.
When hauling extension ladders, place the ladder’s weight-bearing rails directly on both crossbars. Secure with at least four tie-down straps — two per crossbar — using our integrated anchor loops. For lumber and building materials, distribute weight evenly and avoid cantilever loads that extend significantly beyond the crossbars.
Installation and cover compatibility
Our BakFlip CS Rack System installs in under 30 minutes using your existing tonneau cover’s mounting rails. The rack’s universal bracket design works with all current BakFlip models including G2, MX4, MX4 Pro, F1, and Revolver X2 and X4 series covers.
You’ll mount the rack’s support legs to the same rail channels that hold your cover panels. Our included spacer blocks ensure proper clearance, allowing your BakFlip cover to fold completely open while the rack remains installed. No drilling, cutting, or permanent modifications to your truck bed.
Materials, construction, and durability
We manufacture BakFlip ladder rack systems from aircraft-grade 6061-T6 aluminum alloy. This material provides exceptional strength-to-weight ratio — each crossbar weighs just 8 lbs while supporting 80 lbs of cargo. The aluminum construction won’t rust in wet climates or corrode from road salt exposure.
All connection points feature stainless steel hardware and reinforced mounting brackets. Our matte black powder coat finish undergoes a multi-stage preparation process including chemical etching and high-temperature curing. The result is a durable surface that resists chips, scratches, and UV fading through years of outdoor use.
Complete your truck bed setup with these BakFlip accessories
Rated 4.8 by verified buyers
Common questions about BakFlip ladder rack compatibility
The CS Rack System is compatible with all current BakFlip folding tonneau covers including G2, MX4, MX4 Pro, F1, Revolver X2, and Revolver X4 models. The rack uses your cover's existing mounting rails, so no additional drilling or modifications are required.
If you have a different brand of tonneau cover, the CS Rack will not fit. Our system is engineered specifically for BakFlip rail designs and mounting points. Contact our fitment specialists at support@bakflip.com to verify compatibility with your specific truck and cover combination.
Each crossbar supports up to 80 lbs when weight is evenly distributed across the bar's full length. For two crossbars, your total capacity is 160 lbs of cargo. This rating assumes stationary loads — reduce by 20% when driving to account for road forces and vibration.
Always position heavier items toward the center of each crossbar and use at least four tie-down straps to secure cargo. Make sure your combined load (including rack weight) stays within your truck's payload capacity listed in your owner's manual.
Yes, your BakFlip cover maintains full fold-and-flip functionality with the CS Rack mounted. The rack sits high enough above the bed rails that folded cover panels nest underneath without interference. You can open the entire cover to access your full truck bed or fold just the sections you need.
Our included spacer blocks ensure proper clearance between the rack legs and cover panels. This design lets you use both your tonneau cover and ladder rack simultaneously without removing either component.
You'll need basic hand tools for installation: a 1/2-inch socket or wrench, 9/16-inch socket or wrench, and a Phillips screwdriver. The entire system installs in 20-30 minutes using your existing BakFlip mounting rails — no drilling required.
We include all necessary hardware: stainless steel bolts, lock washers, nylon-insert lock nuts, and model-specific spacer blocks. Our instruction manual provides torque specifications and step-by-step photos. Video installation guides for popular truck models are available on our website at bakflip.com/install.
The BakFlip CS Rack features a low-profile aerodynamic design that minimizes wind resistance. The crossbars use an airfoil-shaped extrusion that reduces drag compared to traditional round or square tube racks. Most customers report minimal impact on fuel economy — typically 0.5 to 1 MPG difference on highway driving.
When not carrying cargo, you can remove the crossbars in seconds using our quick-disconnect clamps while leaving the support legs installed. This reduces wind resistance to near-zero when you don't need the rack's full capacity.
BakFlip ladder rack systems require minimal maintenance thanks to corrosion-resistant aluminum construction and stainless steel hardware. Wash the rack monthly with mild soap and water to remove road salt, dirt, and debris. Avoid pressure washers directly on mounting points.
Inspect all bolts and connection points every three months. Tighten any hardware that has loosened from road vibration using the torque specifications in your installation manual. Apply a light coat of silicone spray to moving parts (quick-disconnect clamps) twice per year. Our powder coat finish needs no special treatment — it maintains its appearance through regular washing.
We back the BakFlip CS Rack System with a 3-year structural warranty covering defects in materials and workmanship. This includes the aluminum crossbars, support legs, mounting brackets, and all included hardware. The warranty covers cracking, bending, or failure of welded joints under normal use.
Cosmetic damage from accidents, improper installation, or overloading beyond the 80 lb per bar capacity is not covered. Normal wear items like powder coat finish and rubber bushings have a 1-year warranty. Register your rack within 30 days of purchase at bakflip.com/warranty to activate full coverage.