BAKFlip MX4 for Ford Maverick | Hard Folding Tonneau Cover
We designed the BAKFlip MX4 specifically for your Ford Maverick’s compact bed, delivering premium protection without sacrificing cargo access. This hard folding tonneau cover features aircraft-grade aluminum panels with a matte finish that complements your truck’s profile while keeping your gear secure.
Our patented folding design lets you open the cover in sections or fold it completely against the cab for full bed access. The MX4 installs in approximately 30 minutes using integrated clamps—no drilling required. Whether you’re hauling weekend gear or daily essentials, the MX4 keeps your Maverick bed protected from weather and theft while maintaining your truck’s fuel efficiency.
MX4 specifications for Ford Maverick
Premium Aluminum Construction Built for the Maverick
We built the MX4 with heavy-duty aluminum panels that stand up to everything you throw at them—from highway debris to extreme weather. Each panel features our proprietary FRP (Fiberglass Reinforced Polymer) coating that resists dents, scratches, and UV damage without adding unnecessary weight to your Maverick.
The panel edges are reinforced with weather-resistant seals that create a tight barrier against rain, snow, and dust. Unlike soft covers that sag or flap at highway speeds, our rigid aluminum construction maintains its shape and stays secure at any speed. The matte black powder-coat finish matches factory bed rails and won’t fade or chalk over time, even under intense sun exposure.
Four-Panel Folding Design for Maximum Versatility
The MX4’s patented four-panel system gives you multiple cargo configuration options on your Maverick. Fold one panel back for quick access to front-bed items. Open two panels to load medium cargo. Or fold all panels completely against the cab for full bed access when you need it.
Each panel locks securely in the upright position with our integrated hold-up straps, so you don’t need to worry about panels slamming down while loading. The panels fold with minimal effort—no heavy lifting required. When all four panels are folded against the cab, you retain full bed length for oversized cargo while the cover stays protected.
No-Drill Installation in About 30 Minutes
We engineered the MX4 to install without drilling holes in your Maverick bed. Our integrated rail clamp system attaches directly to your factory bed rails using hand tools—no permanent modifications required. Most Maverick owners complete installation in 30 minutes or less following our step-by-step instructions.
The kit includes pre-assembled side rails that drop into place on your bed rails. You’ll tighten the clamps, position the drain tubes, and attach the four panels using our buckle system. Everything arrives pre-aligned from our factory, so you won’t spend hours adjusting fitment.
Complete Your Maverick Bed Setup
Rated 4.8 by verified buyers
Common Questions About the MX4 for Ford Maverick
Yes, our MX4 is custom-engineered for 2022-2025 Ford Maverick models with the 4.5-foot bed. The cover uses your factory bed rail system and requires no modifications to fit. We designed the mounting clamps specifically for the Maverick’s unique bed rail profile to ensure a perfect fit.
If you have aftermarket bed accessories like rail-mounted tie-downs or bed extenders, contact our fitment team to confirm compatibility before ordering.
Most Maverick owners complete MX4 installation in approximately 30 minutes using basic hand tools. The cover arrives with pre-assembled side rails and buckle-attached panels, so you won’t spend time on complicated assembly.
You’ll clamp the rails to your bed rails, route the drain tubes through your stake pockets, and verify panel operation. Our Maverick-specific installation guide includes photos of each step. If you’ve installed tonneau covers before, you may finish even faster.
Yes, you can fold back one or more panels while cargo remains in your bed. The four-panel design gives you flexibility to access different sections without removing items. Each panel folds independently and locks in the upright position with integrated hold-up straps.
For example, if you have cargo toward the tailgate, fold back just the front panel to access items near the cab. When all panels are folded against the cab, you retain full bed access for oversized cargo while the cover stays safely secured in the upright position.
Yes, the MX4 is compatible with most spray-in bedliners including LINE-X, Rhino Linings, and other brands. Our rail clamp system attaches to your bed rails, not the bed floor, so spray-in liners don’t interfere with installation.
If your bedliner extends over the top of your bed rails (over-rail style), you may need to trim a small section where the clamps mount. Our installation guide includes instructions for bedliner trimming if necessary. Drop-in plastic bedliners typically work without modification.
The MX4 supports up to 300 pounds of evenly distributed weight when fully closed. This means you can stand or kneel on the cover to access your Maverick’s cab roof or load a roof rack without damaging the panels.
The aircraft-grade aluminum construction and reinforced panel edges distribute weight across the entire cover surface. However, avoid concentrated weight on a single point or panel edge. The 300-pound rating assumes weight is spread across multiple panels, similar to a person standing or walking on the closed cover.
The MX4 is designed to be weather-resistant and will keep your bed dry in normal rain and snow conditions. Our perimeter seals and automatic drain system channel water away from your cargo area through drain tubes that exit via your stake pockets.
While the MX4 provides excellent weather protection, no tonneau cover is 100% waterproof in extreme conditions like pressure washing, flooding, or standing water. For maximum protection, we recommend storing moisture-sensitive items in weatherproof containers or bags as an added precaution.
Yes, our BAKBox 2 toolbox is specifically designed to mount underneath the MX4 on your Maverick. The toolbox installs between your cover and bed, remaining hidden and secure while giving you lockable storage for tools and valuables.
The BAKBox 2 mounts near your bulkhead and doesn’t interfere with the MX4’s folding operation. You can access the toolbox by folding back the front panel while the rest of your cover stays closed. This combination gives you both full-bed coverage and dedicated secure storage in one integrated system.